Yes it's the Y17dt

Oh ok don't suppose there's away of testing it? I've tested all fuses relating to ecu and their all fine. Yes I know the one you mean I see it when I was changing my starter motor I'll see if I can get a new one or a recon one. Is that the edu? I know the ecu is on top of the engine in mine. I think the edu is quite easy to change.

Yeah think it is,think I'll take it off check connection and see if I can get a second hand one or mine fixed, it's leading me to believe it's that mate. Thank you very much

Dave from clacton

Edited by elekie&a/c doctor on 31/05/2024 at 17:54

Without sounding too thick lol

Is the fuel pump next to the edu? It's just I'm trying to chase the leak off pipe that goes to the pump, I know the Leake off pipe comes from the injectors. It's just I want to connect a hand primer to see if I can get diesel to the injectors that way to rule out an air problem.

Is that the one that runs from the tank to the pump? So would it be best to jack the van up and do it from underneath where the fuel line goes into the pump? Sorry never really dealt with furl systems before.

I've done that mate and pumped fuel into a bottle and seems to come out OK that was the pipe that delivers the fuel to the filter or do you mean conect the priming bulb in between the pipe and connect to the filter then prime it?

I'm just trying to locate the throttle body now,if you could suggest a simple way of locating it?