So I own a 2019 BMW 1 series.
The sound system was already decent but I wanted to add more bass.
I bought this:
www.halfords.com/technology/car-audio/car-amps-and...l
And this wiring kit:
www.halfords.com/technology/car-audio/car-amps-and...l
I installed it following a video I found on Youtube.
The sub is working but the additional bass is barely even noticeable.
I have attached a few pictures. I know the wires are messy - I was planning to solder them once I had it working properly.
The battery and fuse box are in the boot of my car.
- The power cable goes directly to the positive terminal of the battery.
- Ground wire to a bolt on the chassis.
- I used a fuse piggyback thingy to connect the remote wire to the fuse for the 12v sockets.
- I cut the ends off the RCA cables and spliced the wires to both the existing rear speakers using cable lock connectors.
Is there something about the way I have wired it that is reducing performance, or do I need to buy a better one?
Any thoughts welcome.
Thanks
thumbsnap.com/s/YTegs9xw.jpg[
thumbsnap.com/s/f6vnx6GF.jpg
thumbsnap.com/s/K3BhREJS.jpg
thumbsnap.com/s/Rwh7tb2c.jpg
Edited by Daniel Payne on 06/04/2024 at 16:48
|