98 Pug 106 flywheel Sensor. Can anyone tell me that resistance this sensor should be. Thanks Peter
|
Would also appreciate the values for the temperature sensors as well. Thanks in Anticipation. Peter
|
Peter,
According to my data (CAPS), and assuming the car is a 1.1, as follows:
Crank Angle Sensor 300-400 Ohms.
Coolant Temp Sensor 5500 Ohms @ 0 deg C
1200 Ohms @ 40deg C
290-370 Ohms @ 80deg C
Strangley they give the same resistance values for the Air Temp Sensor, but I suspect this may be an error.
HTH, Adam
Whatever is rightly done, however humble, is noble.
|
Adam, thanks for the reply, ideal, I'll check the air temp in case it is the same but I would not have thought so as the temp rage is the air flow is somewhat different. Thank again Peter. I did measure the Crank Sensor at 414 ohms when my daughter was home over the festive season. I'll check the others if she comes home at the weekend. Thanks again Regards Peter
|
|