What is life like with your car? Let us know and win £500 in John Lewis vouchers | No thanks
Nissan Qashqai - Qashqai 1.5tdi Rurbo - REVIVE question - Trail71

Having turbo/boost issues on my Qashqai

Have been recomended to try Revive Turbo cleaner - which involves disconnecting the turbo inlet and injecting the solution directly into the trubo intake after the MAF sensor

Problem is - the car just wont start if the turbo intake pipe is not connected

Is there something obvious I'm doing wrong?

Thanks

Nissan Qashqai - Qashqai 1.5tdi Rurbo - REVIVE question - elekie&a/c doctor
Can’t see any reason for it not starting with the intake pipe off . Have you tried with the maf sensor disconnected? This will put the system into default mode . This may cause the Mil to illuminate.
Nissan Qashqai - Qashqai 1.5tdi Rurbo - REVIVE question - Trail71

Hi mate

Yes - have tried both ways - I disconnected the intake and tried with the MAF plugged in ad not plugged in

Assuming I'm disconnecting the turbo inlet - from what I've seen on line - I'm pretty sure it is

Nissan Qashqai - Qashqai 1.5tdi Rurbo - REVIVE question - Trail71

Am I getting the two intakes confused?

From this pic.

Nissan Qashqai - Qashqai 1.5tdi Rurbo - REVIVE question - elekie&a/c doctor
Possibly. Follow the pipe from the air intake filter down to the turbo . This is the pipe you need . Could be the one on the left .
Nissan Qashqai - Qashqai 1.5tdi Rurbo - REVIVE question - elekie&a/c doctor
It’s the rubber ribbed pipe that you have marked #2 which is the air intake pipe .
Nissan Qashqai - Qashqai 1.5tdi Rurbo - REVIVE question - Trail71

Thanks all

Revive has now been sprayed in - and so far - Limp mode seems to be fixed !! (fingers crossed)