Hi,
Today I tried 4 different car shops asking if they had a MAF Sensor and they all said no and there suppliers don`t even have one. Might because of the age of the car.
I checked Ebay and there is one that is very similar to the one on my car.
I decided to try and take it off to check that it`s the same as the one on the car.
The problem that I have now is that the screwdriver head is different to anything I have ever came across before. It looks like an Allen head with a spigot in the middle of it.
I then bought a Draper 33 piece security screwdriver bit set because they have a hole up the centre of the bits. None of them fit the screw.
Do you know what the bit I need to uninstall the MAF Sensor?
I took photos of the MAF Sensor to show you the screw, but I am unable to upload them onto my post.
Thanks!
|