My Mrs CHR hybrid has this gauge. I don't really find it to be particularly useful to be honest. It probably exists only to fill in that portion of the instrument cluster that would be used for the tachometer in a non hybrid version of the same car.
ECO I think just means when the hybrid system is operating as intended with the ICE being used intermittently to top up the battery. PWR is when the ICE is assisting the electric motor to provide drive to the wheels. and CHG is when the system is regenerating electricity, under deceleration or coasting down a hill for example.
To answer your questions,
1. I see it being similar to Rolls Royce power reserve meter, showing how much left its got to give.
2. Engine has a number of RPM steps that it will rev to depending on what the current power demand is. Unfortunately I cant tell what the equivalent RPM are (relying on aural feedback to ascertain). ICE redlines only when maximum power is called for (revving past the point of peak torque causes a loss in energy efficiency which the hybrid system tries to avoid).
3. Not really. In the PWR band, ICE is usually on helping to provide tractive effort (but also might not be). in the ECO band, it could either on or off at any given time.
4. Yes I think so, certainly seems to from my observation.
I've found in practice that the best thing is to just get in and drive and pay little heed to what the ICE is doing. Its primary function in the system is to work as a generator, with occasional tractive assistance. Just concentrating on accelerating and decelerating gently and leaving the system to its own devices yields the best results.
For the car nerds like ourselves, the power flows between ICE, battery and drivetrain can be displayed on the centre screen or on instrument cluster.
If there's anything else you would like to know about our experience of running a hybrid, please feel free to ask below,
Regards,
M
|