What is life like with your car? Let us know and win £500 in John Lewis vouchers | No thanks
Audi A1 - Air con only works on highest setting - Halmerend
I noticed that the air con is only working on the highest number 4 setting when I got in my wife’s car this morning. 1,2 and 3 not working and no blowing at all. The red air con on light also goes out when it is switched from 4 to 3. Any ideas what it might be please? It’s a 1.0 tfsi 2017 model.
Audi A1 - Air con only works on highest setting - Rerepo

Blower resistor pack burnt out.

Audi A1 - Air con only works on highest setting - elekie&a/c doctor
As above . Easy fix , part accessible from passenger footwell , or behind glovebox, depending on what heater box fitted . Costs about £20.

Edited by elekie&a/c doctor on 28/06/2021 at 21:38

Audi A1 - Air con only works on highest setting - Halmerend
Great thanks. Really appreciate this. Haven’t got a clue what I’m looking for but will take a look.
Audi A1 - Air con only works on highest setting - Halmerend
www.a1-forum.co.uk/a1forum/viewtopic.php?t=171866
Audi A1 - Air con only works on highest setting - Halmerend
Found the above which seems to be helpful.
Audi A1 - Air con only works on highest setting - elekie&a/c doctor

As I suggested earlier, there are 2 locations for this resistor. One is above the passenger feet that does not need removal of the glovebox.

Audi A1 - Air con only works on highest setting - Halmerend
Thanks I’ll have a look shortly.
Audi A1 - Air con only works on highest setting - Halmerend
Had a quick look under the glove compartment with a torch and can’t see anything obvious other than black plastic underneath. I can see two slider clips on an oblong shaped piece of plastic. Could it be under there?
Audi A1 - Air con only works on highest setting - elekie&a/c doctor

There may be a black foam insulation panel below the glovebox. carefully grab hold of it and pull it aside. if the resistor is located here, there will be a 4 pin electrical connector visible.

Audi A1 - Air con only works on highest setting - Halmerend
Thank you. I’ll have a look in daylight and report back. Really appreciate your help.
Audi A1 - Air con only works on highest setting - Halmerend
Had a look and the only foam I can see is the black insulation foam against the bulkhead so I’m assuming that the glove compartment needs to come out. Thanks.
Audi A1 - Air con only works on highest setting - Rerepo
Had a look and the only foam I can see is the black insulation foam against the bulkhead so I’m assuming that the glove compartment needs to come out. Thanks.

Look for a four-wire connector - the resistor pack is on the end of that.

Audi A1 - Air con only works on highest setting - Halmerend

Will have a look today thank you to see if I can find it.

Audi A1 - Air con only works on highest setting - Halmerend
I can’t see anything at all electrical in the footwell behind the glove box so assume that the latter needs to be removed to get at it.