Hi,
I have a 2016 Ford KA, about 6 weeks ago the check engine light came on with fault codes:
We removed the MAP sensor and discovered it was coated in oil so cleaned it, reset the fault codes and it was fine.
Today, the same fault codes appeared and the car went into limp home mode, once again the same fault codes are present and the MAP sensor is covered in oil again.
The air filter and piping is dry, there's no cracks in any of the housings and the only place we can see oil is on the valve of the throttle body.
Does anyone have idea where the oil might be coming from and what the issue might be?
Thanks
|