Hi,
I Bought a Citroen C3 2002 1.4 with head gasket failure. The battery wasn't too clever when I bought it but during my time of repair it went flat.
Fixed all the headgasket problem, went to start it, and it turns over but won't fire up.
I believe the reason for this is the BSI has either lost its way or has got damaged somehow, as I have no got no power to the dash at all, no lights, and irratic wipers.
I have Lexia, plugged it in but it says permanent fault to everything that is run from the BSI. E.g. Wipers, light, radio post, speedo etc.
i'm looking at replacing the bsi unit along with an ecu and transponder set, but my ECU is sagem. I can't find anywhere another Sagem ECU with the bsi and transponder set. But I can find bosch, Magneti Marelli and Siemens sets. The BSI and fuse board is Siemens.
I was just wondering if anyone knows If i can put a different make ECU on the car with the same connections?
Or anyone knows how to virginise and re code a BSI on lexia, beacuse I have no Idea.
Thanks In Advance
|