The instrument that you are describing is an electronic compass - I had the same vehicle and have answere this previously. According to the handbook the compass shows the position of the vehicle by the 16 azimuth system when the ignition is placed in the on position. That means that you have N,S,E,W, travel direction indication, each graduation = 22.5 degrees. Basically the compass rotates to show you the direction that your truck is going.
If the compass is not working correctly or needs resetting, it will probably start flashing and not read correctly. To reset it, press the adjustment button marked S to the lower right of the compass for 1 second. Now turn the vehicle around through 360 degrees (say in a quiet carpark or field etc). This should reset the compass and return it to normal operation.
Best Regards. Christo
The instrument that you are describing is an electronic compass - I had the same vehicle and have answere this previously. According to the handbook the compass shows the position of the vehicle by the 16 azimuth system when the ignition is placed in the on position. That means that you have N,S,E,W, travel direction indication, each graduation = 22.5 degrees. Basically the compass rotates to show you the direction that your truck is going.
If the compass is not working correctly or needs resetting, it will probably start flashing and not read correctly. To reset it, press the adjustment button marked S to the lower right of the compass for 1 second. Now turn the vehicle around through 360 degrees (say in a quiet carpark or field etc). This should reset the compass and return it to normal operation.
Best Regards. Christo
If you read the OP it states they know how to reset the compass and also gives the method its the outside temp thats not working.
|
