Hi there,
I have a honda civic 2013 and I must've misjudged how high a kerb was. as a result the black thing under the front bumper by the wheel (not sure if it is a flap for mud or something) popped off.
It is a flexible material, and seemed bolted in, but the circular cutouts through which it was bolted to the underside of the car must've flexed under pressure and the thing popped off the bolt.
I tried using whatever I had at home to remove the bolt and feed it through again (I couldn't pop it back on as it just flexes too much). The bolt seemed difficult to remove even after applying wd40 so decided not to force the issue.
Hopefully someone can assist with the following questions?
1) Is this part important? I tried to google and some say it's for dirt protection and some say it's for aerodynamics.
2) Is it ok that I only have 1 on there on one side, rather than 2? Driving seems fine with only one attached.
3) Is it easily put back on next time I get a service or tyre change? It doesn't have any cracks as far as I can see and but I don't know if it's just screwing it on or the bumper needs removal or whatever.
Appreciate any insight and thank you in advance!!
|