So a couple of days ago I get the dreaded 'Soot Accumulation in DPF Too High' message on my 6, which has just had it's 5th birthday and done 40k. Following Mazda's helpful guidance, off for a run down the M23 I go, keeps revs between 2.5-3k. Halfway back the message turns into 'DPF Malfunction', so I presume this means the automatic regen failed.
I call the local Mazda garage, who inspect it (well, probably plug in their code reader and charge £120 for the privilege) and tell me that the Throttle Body needs to be replaced and a manual regen tried, but this - after already leaving me £500 odd worse off - doesn't guarantee that it'll fix the problem, and the DPF might need to be replaced anyway. I'm skeptical on whether anything more than a regen is needed - car hasn't gone into limp mode and showing no performance issues and no unusual emissions. Not sure how they've reached the conclusion that the throttle body needs replacing...
Having found the procedure for the manual regen online, I'm tempted just to do it myself. But the worrier in me is thinking that I could damage to the engine, if the DPF is completely blocked!
So my options are:
1) Perform the regen and hope for the best!
2) Get it cleaned professionally and hope that sorts it
3) Bite the bullet and let Mazda do their worst...
Any advice?
Edited by BobsyourUncle on 19/10/2020 at 20:03
|