https://www.autoexpress.co.uk/electric-cars/353209/energy-firms-want-right-switch-electric-cars-charging-home
That link doesn't bear out the OP's assertion that the powers sought are contrary to the aim of moving to electric cars. I suspect another example of the phenomenon I've commented on before where, like grief or major change at work, people are at an early stage (denial) in the process of working through that change.
My read of it is that Smart Meter technology in its next iteration might have the capacity the control individual household circuits where those supply high demand devices. The operators of the National Grid and the generation companies would like the authority to use that facility where they need to shed load to prevent the grid from failing. This would be an emergency measure to prevent widespread cut offs as happened last year when two generators failed at same time. Electric cars are quoted as an example of high demand devices along with electric central heating.
If your car is on charge and it drops out for an hour in the evening peak it'll still be fully charged tomorrow morning.
Shed-loading is rather a blunt instrument, given that it cannot tell between the person using their hob/oven to cook food, boil a kettle, use a hairdrier or charge their EV.
I can't see how any meter would be able to differentiate - only the max load, which surely depends on the number of occupants and what they are doing than how crutial the specific devices that use electricity are. What happens if someone on home medical care has equipment that takes them 'over the top' of their allowance?
The terrible effects of shed-loading or similar power cuts are shown by the current situation in California, which has no excuse given they've known of their problems for decades.
My sources say that 'smart' (they aren't) meters are being advocated mainly so that variable charging can be implemented at peak times (via the back door) and so that non-payers can be disconnected without the need for a call-out.
Smart meters are a waste of time - all you need to do is know which devices at home or in your workplace use the most power: it's hardly difficult - you either read the manual, check online or make reasonable judgements based on the type of equipment, e.g.
Oven, fridge/freezer, elec hob, incandecent lights, air conditioning and larger forced air ventilation systems, commercial pumps, items with large motors, computer server systems (including cooling for them), photocopiers, electric heating, devices with significant heating elements, etc, etc, in addition to charging and EV.
Look at the kW (or multiply the Amps by 230V) rating and multiply that by the hours normally working per day then the kWh elec rate.
Or connect a meter to each device and measure each as they are used.
The main way we can save on electricity (especially if we can't afford to buy new products all the time) is to not leave lights on when we aren't in a room for a reasonable time (more than 30 sec to 2 mins), don't leave items on standby if not needed for operation and switch items off if you can when finished. Most people already have switched to low energy lightbulbs.
It's also pointless buying a low-powered device if it doesn't meet the needs of the owner or the high replacemnt cost means you don't save money over its life - better to replace it when it cannot be repaired or doesn't work well any more. The same goes for gas boilers.
Far better (and more cost-effective) to improve your home or office building's thermal efficiency and/or fit solar thermal or PV panels to generate hot water or electricity for the grid yourself.
Edited by Engineer Andy on 19/09/2020 at 13:37
|