An update (in case anyone else with the same problem finds this thread)...
Before attempting to burp the car, I topped up the expansion tank close to the maximum line: it wasn't far off before, but I did it in case it burped so much that the coolant level fell too far.
With the car parked on a slight incline and the engine cold, I removed the expansion tank cap and managed to get the engine running (by hitting the accelerator quickly before it stalled). With the expansion tank cap still off, I let it sit and run, occasionally revving the engine a little (to about 3000 RPM). When I put my foot on the accelerator, I heard even stronger trickling --- it sounded at times like more of a whoosh than a trickle. After about 20-30 minutes of this, I switched it off, let it cool down and replaced the cap. I then left it until the following day.
When I tried it, it started first time without stalling, thank Heaven. I've tried it a few times since and it still starts --- there was one stall, but it's nothing like it was. So it seems that somehow the cooling system was at least in part responsible for the cold-stalling. I don't know how.
I'm not sure that the problem is solved, but the car seems to start far more willingly than it did, and if what I've written here helps someone, then my posting it won't have been in vain... Thanks again to all who replied.
Incidentally, I ordered a Haynes manual for my model the other day: it listed several causes for immediate stalling --- none of which mentioned the cooling system!
Edited by Clueless Dipstick on 13/09/2020 at 19:02
|