Most likely a worn Thrust bearing. Play in these normally make a noise when the clutch pedal is depressed.
If you are a reasonable DIY'er and have a workshop manual then replacement part just saw for approx. £10. Expect a garage to charge you 3-4 hours labour to replace plus they will most likely want to change the clutch friction plate & pressure plate at the same time. which aren't expensive, just saw a pattern Clutch kit including the bearing £32. ECP. So a total bill of £300'ish
Danger is if it disintegrates it could damage the pressure plate, gearbox casing or possibly the flywheel. This would be good bye
If it were me I'd get a manual and have a go, but even forking out £300 would be safer than have a roadside failure.
|