Thing is: EOBD code readers are just reading fault codes from the ECU and transponding them into readable format, no?
No, not always. Generic code readers don't pick up all faults, or cannot display live data or check components.
I've done some tests with various scanners on my car with a known EGR, diesel heater sensor, and glow plug faults and only the Peugeot specific diasgnostic gear picked up these fault codes and read the live data to show that the parts were indeed faulty.
And on two occasions I've known a national breakdown firm say that a customer's high pressure fuel pump has failed because that's what the code said, only for it to be an issue with the tank lift pump - one was a blocked filter in the pump, the other was weak current to the pump due to an old battery.
Don't get me wrong, reading codes yourself isn't bad, but you do need the skills and experience to be able to interpret the codes. Sometimes you can strike lucky, sometimes not. Depends if you like throwing money and parts at a problem.
And on the forum I frequent, I've lost count of the number of times a new member has registered because their car has a fault, they've had a driveway diagnostic only to be given the results "P1351 - Dealer specific code".
|